The DDM Plus Kits use only Ultra HID Bulbs and Premium HID Ballasts!
Why DDM Plus: aside from the higher output from our Ultra HID bulbs you also get a more efficient, faster starting ballast.
BALLASTS: The DDM Plus Ballast is an improved version of our standard DDM ballasts. The Plus ballasts require less power to ignite the bulbs, limiting the need for an HID Harness. Each ballast is protected against RF feedback by an integrated ferrite bead before the ignitor to prevent any radio static. More efficient than our standard DDM ballasts and the DDM Plus kits run cooler and last longer.
ULTRA HID BULBS: Our Premium Ultra HID bulbs are quite simply the best. Modeled after the Osram CBI line of performance bulbs we've sourced quartz glass from Philips, salts from APL USA and electrodes from Plansee in Austria.. On top of this we've redesigned the capsule to produce up to 20% more light than the standard Apexcone HID bulbs which are already an industry leading bulb. The quartz glass is optically clear with a UV coating to protect the headlights from UV radiation. The warm up time on the Ultra bulbs is about 20% quicker than Apexcone bulbs and will reach full brightness in 10-15 seconds.
Perfect Beam Alignment: Manufactured in a state of the art facility using automated processes we guarantee perfect alignment of the xenon capsule for the best beam pattern possible.
Relay Option: Use this relay harness to connect HIDs to cars with very small gauge wiring that cannot supply the initial surge current required to light the bulbs reliably. Symptoms indicating the harness is required would be intermittent starting or lights going out after being turned on for several minutes and requiring you to turn the lights off and back on for them to turn back on again. Recommended for all 55W HID installations but most American and European cars work at 35W/55W without the harness. The harness is definitely recommended for Quads and other ATVs or when running multiple HID installations. This harness is a fused relay isolation harness capable of supplying 20A at 12vdc. Not required when using High / Low kits.
Please Note: This is a non-Canbus HID kit. If your vehicle requires Canbus system (bulb-out error system), or you have DRL (daytime running light) built on your low beam or high beam, you would need to use a Canbus HID kit instead, to prevent/address any compatibility issues.
RETURN WIRE NOTE (H11A vs H11B): Most main/low beam Projector style headlights use H11B with the exception of Kia/Hyundai, and Reflector style headlights normally use H11A. See our article here for more information on how to select the correct bulb for your vehicle.
OUTPUT: 35W: Up to 3400 Lumens with a 4500K bulb.
Included: 2 x DDM Plus HID Ballasts, 2 x Ultra HID Bulbs, 2 x Application Specific Adapter Cables
Sizes available: H1, H3, H4, H7, H8, H9, H10, H11, H13, H16, HB4, 880, 9004, 9005, 9006, 9007, 5202