For use with Morimoto's 2Stroke 2.0 LED headlight bulbs. Prevents bulb out warnings or flickering.
Flicker-Free: Is the way to be! But unfortunately if you're trying to run a set of LED headlight bulbs on a circuit that runs off pulsed voltage, then you're out of luck. Out of luck unless you've got a set of the 2Stroke Anti-Flicker harnesses that is!
Designed: With some massive 10K mF Capacitors inside to help absorb the pulsing current coming from the factory wiring, then release it in a smooth fashion out into the LED bulb drivers, they're quite simple and effective.
In and Out: No need for complicated wiring to solve this common issue. The 2Stroke Anti-Flickers are easy to setup. With a standard 9006 Male Input and a standard 9006 female output - in most cases you can just "plug n play" in between the factory wiring and the Drivers on your bulbs.
Daytime Running Lights: Often run off both pulsed voltage, and low voltage. It's important to understand which one your car uses - because if you're having issues with a low voltage setup, these will not solve that problem (since they don't increase the voltage coming from the car...they just smooth it out).
LOW BEAMS: Normal / PWM Pulsed
HIGH BEAMS: Normal / PWM Pulsed
FOG LIGHTS: Normal / PWM Pulsed
DRLS: Normal / PWM Pulsed
ELECTRICAL SYSTEMS: 12V
Single Beam CONNECTOR: 9006 Male Input/Output (H11/H9/H8, H1, H3, H7, 9005, 9006, 9012, 880, 5202, D2S/H2R/D2H)
Dual Beam CONNECTOR: 9007/H4/H13 Male Input/Output (H4, H13, 9007)
Included: 2 Anti-Flicker Modules (compatible with Morimoto 2Stroke 2.0, or any 9006 connection)
Warranty: 2 Years